Ready Solutions

What kind of solution are you looking for? A device? An IoT platform? Discover all Sigfox ready products and contact the relevant partners for your IoT project

The All-in-One Smart Button


Asia Zone Devices – RCZ4


  • Vehicles & Fleet Tracking
  • Shipping containers
  • Trailers & Mobile Assets
  • Logistics Management
  • Insurance & Logistics applications
  • Anchoring & Security of Assets


  • ABS/ Polycarbonate plastic
  • IP67 Waterproof, dustproof and rugged
  • Adaptive Tracking –
  • 3D Accelerometer
  • Easy Configuration

The EW Pulse is a ready-to-use pulse logger or radio transceiver that allows the transmission of pulse data via a connection with pulse capable utility meters such as water, gas and electricity meters.  Housed in a durable enclosure and designed to withstand extreme environmental conditions, the device is powered via a Lithium battery allowing for a lifespan of up to 10 years.  Once connected to a pulse capable meter, it automatically transmits pulse output messages via Sigfox low-power wide-area network to a cloud-based server with data subsequently transferred via an API to a software platform to facilitate diagnostic analysis and reporting.


  • Frequency bands: 920-923Mhz (License-free ISM band)
  • Messages: Up to 140 uplink messages per device per day; up to 4 downlink messages per device per day (device initiated)
  • Output power: +22 dBm
  • RF sensitivity: up to -124dBm @ 600BPS
  • Range: up to 10km (contingent on operating environment, LOS etc.)
  • Pulse inputs: 2
  • Pulse input frequency capability: up to 100Hz
  • Downlink configuration
  • Configuration for: Pulse, I2C or analog bridge sensor


  • Detection of opening/closing doors
  • Message sent at each open/close event
  • Weekly ‘awake’ message
  • Other programming available
  • Powered by 2xAA replaceable batteries
  • Battery life over 10 years at normal operations
  • Dimensions: 96x96x45mm (OUTDOOR) or 72x72x27mm (INDOOR) + antenna


  • IP68. Specially designed for wall installation
  • Send data to server. From water meter to remote software application
  • Automatic updating of internal data from server
  • Battery power 2xAA
  • Available with pre-installed antennas or extension cable
  • 3 digital inputs to read water meter pulses
  • Emission max power +15 dBm
  • Memory 128 kbytes
  • Easy configuration with Water System Configurator
  • Up to 10 year battery life


  • Asset Management
  • Vehicle Tracking
  • Theft Prevention
  • Sports Monitoring
  • Personal Protection, Child security,
  • pet tracking
  • Flight Tracking, drone retrieval and
  • light aircraft tracking
  • Baggage Tracking
  • Building Intrusion Alerts


  • Size: 85mm x 48mm x 15mm
  • Weight: 48g
  • Battery Type: LiPo
  • Charging Spec: 100mA (USB Computer), 250mA (Wall Charger)
  • Autonomy: 3 months standby, 2 months (15 mins use per day)
  • Radio Range: 14dBm
  • Geo-localisations: 140 per 24 hours (Sigfox)
  • Emissions Class: SIGFOX Ready U1
  • Flight Mode: Yes, user controllable
  • Ingress Protection: IP40 (1mm intrusion, ambient moisture)
  • Operating Temperature: -25˚C to +60˚C
  • Firmware Updatable: Yes (Arduino), via micro-USB cable


  • Construction Equipment
  • Equipment Rental
  • Offshore Equipment
  • Logistics Monitoring
  • Fleet Management
  • Asset Security
  • Equipment Retrieval
  • Others Customization


  • Built-in with Photovoltaic cells to provide unlimited power
  • Size: 100mm x 100mm x 25mm
  • Weight: 147g
  • Enclosure Type: Flame-resistant ABS (UL94V-0)
  • Battery Type: LiPo 500mah (CE/IEC62133)
  • Charging Spec: Recharged in 10hrs under optimum sun light exposure
  • Operating Temperature: -20˚C to +60˚C
  • Photovoltaic type: 5,5V 90mah – 65x65mm
  • GPS Precision: <10 meters (outdoor condition)


  • Gas oil types A2,C1,C2 and D (as defined by BS2869)
  • Agricultural fuel oils
  • AdBlue
  • Diesel
  • Admixtures
  • Biodiesel/ Bio-heating oil/ Fuel oil/ Waste oil/ Kerosene
  • Detergents/ Lubricants/ Water
  • LPG/Propane
  • Chemicals
  • Liquid Fertilizers


  • Product Dimensions: 88mm (W) x 88mm (L) x 145mm (H) ±1mm
  • Product Weight: 215g C Cell Battery – 255 g D C Battery
  • Housing Material: UV Stabilized Polypropylene
  • Environmental Protection: IP67 – Outdoors
  • Operating temperature: -20⁰C to +60 ⁰C
  • Storage Temperature: 0⁰C to 30⁰C
  • Humidity Range: 10% to 100%
  • Radio Frequency: RCZ1 868MHz (EU) , RCZ2 902MHz (US, Canada, Mexico), RCZ4 920 MHz (ANZ, Latin America & SE Asia)
  • Radio output: RCZ1 (EU) +14dBm, RCZ2/RCZ4 +24dBm
  • Ultrasonic Measuring Range: >12cm to <4M
  • Accuracy: Typically ± 2cm from 12cm to 4M
  • Power Requirements: RCZ1: 3.6V C-Cell Lithium thionyl chloride or 3.6V D-Cell Lithium Thionyl Chloride, RCZ2/RCZ4 3.6V D-Cell Lithium Thionyl Chloride
  • Battery Life: RCZ1 5 years (C-cell hourly comms)/ 8 years (D-Cell hourly comms) , RCZ2/RCZ4 6 years (D-cell on 2 hourly comms/ 3.5 years on hourly comms)

Sens’it is a Sigfox Ready connected device that includes five sensors and one button enabling six different modes. The device comes with web and mobile applications available on These apps allow data visualisation and configuration of notifications depending on what the device is measuring and sending.


  • Temperature and Humidity
  • Light
  • Movement (e.g. to detect door movement)
  • Magnetic (e.g. to detect drawer movement)
  • Vibration (to detect something has moved)
  • Alerting


  • XLEAK is a Sigfox-enabled water leak detector that alerts of the presence of water due to leaks or flooding.
  • It works on both hard and soft surfaces such as carpeting, floor etc. In the presence of water, the two sensing probes short circuit, and the alarm will be triggered.


  • Size: 80mm (D) x 37.3mm (H)
  • Sound Pattern: 3 Short Beeps, 1.5 s pause, repeat
  • Temperature Range: 4.4⁰C to 37.8 ⁰C
  • Humidity Range: <80% relative humidity (RH)
  • Ingress Protection: IP65
  • Low Voltage Threshold: DC 2.65V
  • Buzzer Volume: >85dB(A) @ 1 Meters
  • Alarm Current: <60mA
  • Alarm Sensitivity: 2M
  • Standby Current: <5uA
  • Power Source: DC3V (2x 1.5V Alkaline AA battery, not included).
  • Designed to last 4 years with 1 connection/day
  • Wireless Frequency Options: RCZ1 868MHz (EU) , RCZ2 902MHz (US, Canada, Mexico), RCZ4 920 MHz (ANZ, Latin America & SE Asia)


XSMOK is a photoelectric smoke alarm with heat detection. Thanks to the photoelectric technology, it is more sensitive to detecting slow smolder fires that may smoulder for hours before bursting into flames, rather than thick, black smoke.

The smoke devices does not contain any toxic material as usually in other common alarms.

XSMOK can also be set to “silence” and “do not disturb”. Smok performs a weekly self-test function, designed to validate that it is in working order.


  • Size: 120.1mm (D) x 36.7mm (H)
  • Wireless Alarm Pattern: 2 short beeps, pause 1.2 second, red LED flashing every second, repeat
  • Heat Alarm Pattern: 28 short beeps, pause for 4.5 seconds, red LED flashing every second, repeat
  • Smoke Alarm Pattern: 3 short beeps, pause 1.5 seconds, 3 short beeps, red LED flashing every second, repeat.
  • Temperature Range: 0⁰C to 40 ⁰C
  • Humidity Range: <95% relative humidity (RH)
  • Comply with Standard: EN14604:2005/AC:2008
  • Buzzer Volume: >85dB(A) @ 3 Meters
  • Alarm Current: <70mA
  • Heat Alarm Sensitivity: 54⁰C to 70⁰C
  • Alarm Sensitivity: 0.09-0.15dB/m
  • Standby Current: <60uA
  • Power Source: DC3V (2x  AA battery, not included).
  • Designed to last 4 years with 1 connection/day
  • Wireless Frequency Options: RCZ1 868MHz (EU) , RCZ2 902MHz (US, Canada, Mexico), RCZ4 920 MHz (ANZ, Latin America & SE Asia)



  • Arduino Shield with a Sigfox transceiver module that is compatible with Arduino Uno and other Arduino-based boards.
  • Uses the Wisol or Radiocrafts module certified for Sigfox Zone 4 (RCZ4 – Australia, Hong Kong, Singapore, New Zealand, South America, Taiwan)
  • UnaShield V2S: Based on Sigfox module by Wisol. Includes onboard sensors for temperature, humidity, air pressure, accelerometer and two Grove ports.
  • UnaShield V1: Based on Sigfox module by Radiocrafts.
  • Documentation, sample code and sale of UnaShield:


  • Temperature Range: –40 to +125 °C
  • Temperature Accuracy: ±1 °C (max), –10 to 85 °C
  • Humidity Range: 0 to 100% RH
  • Humidity Accuracy: ± 5% RH (max), 0–90% RH
  • Estimated Battery Life – 2 years, 15-min sampling/ 8 years, hourly sampling
  • Cloud Application: HawkEYE IOT Platform
  • Alerts: Mobile Apps, Email Notification and SMS


  • Digital Input Transmitter (Dry Contact)
  • Modbus RS232/485 for Energy Meter
  • Pulse Meter Transmitter
  • Temperature Transmitter with probe
  • Ambient Temperature transmitter

RCZ4 Availability: Q4 2017


  • Parking Management
  • Bin Monitoring
  • Manhole Monitoring


  • Facility Management
  • Door Monitoring
  • Smoke Alarms


  • Sensor Devices
  • Trackers
  • Security


  • Preventive Maintenance
  • Asset Tracking
  • Connected Helmet


  • Smart Metering
  • Water Irrigation
  • Utilities Metering


  • Home Security Monitoring
  • Connected Defibrillator Box
  • Care Button


  • Air Monitoring
  • Water Monitoring
  • Bush-fire Monitoring


  • Crop Management
  • Flood Monitoring
  • Cattle Management

Find all Sigfox-ready solutions